Safety Information by IBM Safety Information by IBM Safety Information by IBM Scalar Key Manager Server SKM Server 6-66572-02 Sixth Edition (December 2006) INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time. This publication was developed for products and services offered in the United States of America and the United Kingdom. It is possible that this publication may contain reference to, or information about, IBM products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that IBM intends to announce such IBM products, programming, or services in your country. Requests for technical information about IBM products should be made to your IBM reseller or IBM marketing representative. No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation. © Copyright International Business Machines Corporation 2006. All rights reserved. US Government Users Restricted Rights ­ Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Chapter 1. English Chapter 2. Arabic . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . . . . . . . . . . . . . . . . 13 Chapter 3. Brazilian Portuguese . . . . . . . . . . . . . . . . . . 23 Chapter 4. (Simplified) Chinese . . . . . . . . . . . . . . . . . . 37 Chapter 5. (Traditional) Chinese . . . . . . . . . . . . . . . . . . 47 Chapter 6. Croatian . . . . . . . . . . . . . . . . . . . . . . . 57 Chapter 7. Czech . . . . . . . . . . . . . . . . . . . . . . . . 69 Chapter 8. Danish . . . . . . . . . . . . . . . . . . . . . . . 81 Chapter 9. Dutch . . . . . . . . . . . . . . . . . . . . . . . . 93 Chapter 10. Finnish . . . . . . . . . . . . . . . . . . . . . . 107 Chapter 11. French . . . . . . . . . . . . . . . . . . . . . . 119 Chapter 12. German . . . . . . . . . . . . . . . . . . . . . . 131 Chapter 13. Greek . . . . . . . . . . . . . . . . . . . . . . . 145 Chapter 14. Hebrew . . . . . . . . . . . . . . . . . . . . . . 157 Chapter 15. Hungarian . . . . . . . . . . . . . . . . . . . . . 171 Chapter 16. Italian . . . . . . . . . . . . . . . . . . . . . . . 183 Chapter 17. Japanese . . . . . . . . . . . . . . . . . . . . . 197 Chapter 18. Korean . . . . . . . . . . . . . . . . . . . . . . 207 Chapter 19. Macedonian . . . . . . . . . . . . . . . . . . . . 219 Chapter 20. Norwegian . . . . . . . . . . . . . . . . . . . . . 231 Chapter 21. Polish . . . . . . . . . . . . . . . . . . . . . . . 243 Chapter 22. Portuguese. . . . . . . . . . . . . . . . . . . . . 253 Chapter 23. Russian . . . . . . . . . . . . . . . . . . . . . . 267 Chapter 24. Slovakian . . . . . . . . . . . . . . . . . . . . . 279 Chapter 25. Slovenian . . . . . . . . . . . . . . . . . . . . . 291 Chapter 26. Spanish . . . . . . . . . . . . . . . . . . . . . . 301 Chapter 27. Swedish . . . . . . . . . . . . . . . . . . . . . . 315 © Copyright IBM Corp. 2006 iii iv IBM: Safety Information Chapter 1. English Important: Each caution and danger statement in this document is labeled with a number. This number is used to cross reference an English-language caution or danger statement with translated versions of the caution or danger statement in the Safety Information document. For example, if a caution statement is labeled "Statement 1", translations for that caution statement are in the Safety Information document under "Statement 1". Be sure to read all caution and danger statements in this document before you perform the procedures. Read any additional safety information that comes with the server or optional device before you install the device. © Copyright IBM Corp. 2006 1 Statement 1: DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a properly wired and grounded electrical outlet. v Connect to properly wired outlets any equipment that will be attached to this product. v When possible, use one hand only to connect or disconnect signal cables. v Never turn on any equipment when there is evidence of fire, water, or structural damage. v Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures. v Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices. To Connect: 1. Turn everything OFF. 2. First, attach all cables to devices. 3. Attach signal cables to connectors. 4. Attach power cords to outlet. 5. Turn device ON. To Disconnect: 1. Turn everything OFF. 2. First, remove power cords from outlet. 3. Remove signal cables from connectors. 4. Remove all cables from devices. 2 IBM: Safety Information Statement 2: CAUTION: When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. Do not: v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble Dispose of the battery as required by local ordinances or regulations. Statement 3: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. DANGER Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following. Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Chapter 1. English 3 Statement 4: 18 kg (39.7 lb) 32 kg (70.5 lb) 55 kg (121.2 lb) CAUTION: Use safe practices when lifting. Statement 5: CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. 2 1 Statement 6: CAUTION: If you install a strain-relief bracket option over the end of the power cord that is connected to the device, you must connect the other end of the power cord to an easily accessible power source. 4 IBM: Safety Information Statement 7: CAUTION: If the device has doors, be sure to remove or secure the doors before moving or lifting the device to avoid personal injury. The doors will not support the weight of the device. Statement 8: CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. Statement 9: CAUTION: To avoid personal injury, disconnect the hot-swap fan cables before removing the fan from the device. Chapter 1. English 5 Statement 10: CAUTION: Do not place any object weighing more than 82 kg (180 lb) on top of rack-mounted devices. >82 kg (180 lb) Statement 11: CAUTION: The following label indicates sharp edges, corners, or joints nearby. Statement 12: CAUTION: The following label indicates a hot surface nearby. 6 IBM: Safety Information Statement 13: DANGER Overloading a branch circuit is potentially a fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch circuit protection requirements. Refer to the information that is provided with your device for electrical specifications. Statement 14: CAUTION: Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the following label is attached. Statement 15: CAUTION: Make sure that the rack is secured properly to avoid tipping when the server unit is extended. Statement 16: CAUTION: Some accessory or option board outputs exceed Class 2 or limited power source limits and must be installed with appropriate interconnecting cabling in accordance with the national electric code. Chapter 1. English 7 Statement 17: CAUTION: The following label indicates moving parts nearby. Statement 18: CAUTION: To reduce the risk of electric shock or energy hazards: v This equipment must be installed by trained service personnel in a restricted-access location, as defined by the NEC and IEC 60950, Third Edition, The Standard for Safety of Information Technology Equipment. v Connect the equipment to a reliably grounded safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current). v The branch circuit overcurrent protection must be rated at a minimum of 5 A to a maximum of 15 A. v Use 14 American Wire Gauge (AWG) or 2.5 mm2 copper conductor only, not exceeding 3 meters in length. v Torque the wiring-terminal screws to 12 inch-pounds (1.4 newton-meters). v Incorporate a readily available approved and rated disconnect device in the field wiring. Statement 19: CAUTION: The power-control button on the device does not turn off the electrical current supplied to the device. The device also might have more than one connection to dc power. To remove all electrical current from the device, ensure that all connections to dc power are disconnected at the dc power input terminals. OFF 8 IBM: Safety Information Statement 20: CAUTION: To avoid personal injury, before lifting the unit, remove all the blades to reduce the weight. Statement 21: CAUTION: Hazardous energy is present when the blade is connected to the power source. Always replace the blade cover before installing the blade. Statement 22: CAUTION: To reduce the risk of electric shock or energy hazards: v This equipment must be installed by trained service personnel in a restricted-access location, as defined by the NEC and IEC 60950, Third Edition, The Standard for Safety of Information Technology Equipment. v Connect the equipment to a reliably grounded safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current). v The branch circuit overcurrent protection must be rated at a minimum of 13 A to a maximum of 15 A. v Use 16 American Wire Gauge (AWG) or 1.3 mm2 copper conductor only, not exceeding 3 meters in length. v Torque the wiring-terminal screws to 12 inch-pounds (1.4 newton-meters). v Incorporate a readily available approved and rated disconnect device in the field wiring. Chapter 1. English 9 Statement 23: CAUTION: Do not place any object weighing more than 50 kg (110 lb) on top of rack-mounted devices. >50 kg (110 lb) Statement 24: CAUTION: To reduce the risk of electric shock or energy hazards: v This equipment must be installed by trained service personnel in a restricted-access location, as defined by the NEC and IEC 60950, Third Edition, The Standard for Safety of Information Technology Equipment. v Connect the equipment to a reliably grounded safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current). v The branch circuit overcurrent ...